Cyclone Dust Collector

Advantages of our cyclone dust collector

1. The cyclone dust collector is composed of intake pipe, exhaust pipe, cylinder, cone and ash hopper.

2. The structure is simple, easy to manufacture, install, maintain and manage, and the equipment investment and operating costs are low. It has been widely used to separate solid and liquid particles from airflow, or to separate solid particles from liquid.

3. Under normal operating conditions, the centrifugal force acting on the particles is 5 to 2500 times that of gravity, so the efficiency of the cyclone dust collector is significantly higher than that of the gravity sedimentation chamber. Use this principle to succeed

A cyclone dust removal device with a dust removal efficiency of more than 90% has been developed.

4. It is suitable for the removal of non-sticky and non-fibrous dust, mostly used to remove particles above 5μm. The parallel multi-tube cyclone dust collector device also has 80-85% dust removal efficiency for 3μm particles.

rate.

5. The cyclone dust collector constructed of special metal or ceramic materials that is resistant to high temperature, abrasion, and corrosion can be operated at a temperature of up to 1000°C and a pressure of up to 500×105Pa. From technology,

Considering economic aspects, the pressure loss control range of cyclone dust collectors is generally 500～2000Pa.

6. It can be used for the purification of high-temperature flue gas, and can be used for boiler flue gas dust removal, multi-stage dust removal, and pre-dust removal.

For more questions please contact

Email: nick@palmaryeco.com

Phone & Whatsapp: +8618961977750

We will reply as soon as possible.