Double Rotor Classifier
1. inlet material particle size: ≤10mm
2. Capacity: 15-450T/h
3. Application areas: sand and gravel ingredients, mining, coal mine mining, concrete mixing stations, dry powder mortar, quartz sand, etc.
4. Applicable materials: river pebble, granite, basalt, iron ore, limestone, quartz stone, green rock, construction waste, iron ore, gold ore, etc.
Working principle:
The material is fed from the upper part of the material and entered the dispensing area. Under the action of several groups of diversion boards and several group counterattack boards, different particle size materials generate different fall speeds during the falling process, so that the materials and materials can make the material and the material of the material. Several relative frictions are generated so that the dust on the surface of the material is stripped away, and the surface of the material is quickly left under the action of wind so that the material can be fully cleaned.
The materials in the entrance are dispersed and peeled through the multi-level dispersing plate, and the wind blowing from the left side of the scattered plates will blow away the middle coarse material and fine materials in the material flow, and the material is discharged from the bottom of the material. The powder suspended in the airflow enters the multi-layer hierarchical board in the extracted area. The graded board will further extract the rough materials suspended in the airflow. Extract, after *, coarse powder merged into the material. The wind band material of the classification board enters the middle material extract area, and the powder enters the extracted area with airflow. Under the action of the cage-shaped rotor, it throws a slightly thick material. The powder flows into the blasting cylinder for gas-solid separation. The separated fine powder is discharged from the powder mouth. The clean air is used through the air duct into the fan recycling.
6. Performance characteristics:
1. The principle of extraction is advanced, and the product has a variety of extraction systems. The optimized design of the material flow field adopts the air -aerodynamics to make the equipment operating resistance significantly reduced and the extraction efficiency is high.
2. V-shaped scattered grading zone has a simple structure and fewer consumables; no electric dispersing device, small pressure loss, and stable operation.
3. The extraction accuracy is high, and the internal airflow in the rotor is only rising from the rotor.
4. The operation is easy to use the inverter's infinite speed adjustment. The quality adjustment is convenient, sensitive, and reliable, and the regulatory range is wide.
Items |
Unit |
PLX400 |
PLX500 |
PLX600 |
PLX700A |
PLX700B |
|
Capacity |
T/H |
20-25 |
25-30 |
30-50 |
50-70 |
70-90 |
|
Moisture |
% |
Less than 3% |
|||||
Product fineness 0-0.075 |
mm |
2~5% |
|||||
Spindle speed |
|
190-380 |
190-380 |
150-350 |
150-350 |
150-350 |
|
Spindle motor |
model |
- |
Y132M-4 |
Y160M-4 |
Y180M-6 |
Y200L1-6 |
Y200L2-6 |
Rotate speed |
R/min |
125-1250 |
125-1250 |
132-1320 |
132-1320 |
132-1320 |
|
Power |
KW |
7.5 |
11 |
15 |
18.5 |
22 |
|
Fan |
Model |
- |
SCF-12 NO.8C |
SCF-12 NO.8C |
SCF-12 NO.10C |
SCF-12 NO.10C |
SCF-12 NO.10C |
Air volume |
M3/h |
24216 |
30900 |
37960 |
58200 |
71800 |
|
pressure |
pa |
2180 |
2430 |
2340 |
2070 |
2200 |
|
Rotate speed |
R/min |
1500 |
1600 |
1200 |
1000 |
1010 |
|
Motor |
- |
Y180M-2 |
Y200L1-2 |
Y225S-4 |
Y250M-4 |
Y280S-4 |
|
Power |
kw |
22 |
30 |
37 |
55 |
75 |
|
Items |
Unit |
PLX800 |
PLX900 |
PLX1000 |
PLX1100 |
PLX1200 |
|
Capacity |
T/H |
90-120 |
120-150 |
150-180 |
180-210 |
210-240 |
|
Moisture |
% |
Less than 3% |
|||||
Product Fineness |
mm |
0-0.071 |
|||||
Rotate speed |
|
150-350 |
140-350 |
100-300 |
100-300 |
100-300 |
|
Spindle speed |
model |
- |
Y200L2-6 |
Y250M-6 |
Y280M-6 |
Y315S-6 |
Y315M-6 |
Rotate speed |
R/min |
125-1250 |
132-1320 |
440-1340 |
440-1340 |
600-1340 |
|
Power |
KW |
22 |
37 |
55 |
75 |
90 |
|
Fan |
Model |
- |
SCF-12 NO.16C |
SCF-12 NO.16B |
SCF-12 NO.16C |
SCF-12 NO.18D |
SCF-12 NO.20B |
Air volume |
M3/h |
86006 |
119332 |
168000 |
192000 |
21100 |
|
pressure |
pa |
2210 |
2260 |
2700 |
2700 |
2600 |
|
Rotate speed |
R/min |
720 |
800 |
960 |
960 |
710 |
|
Motor |
- |
Y280M-4 |
Y315M-4 |
Y315S-4 |
Y355M3-6 |
Y355L-8 |
|
Power |
kw |
90 |
132 |
160 |
200 |
220 |